Mycotal FAQ

is very unlikely due to the complex nature by which Mycotal interacts with the target pest. How to handle & apply Mycotal How to store Mycotal? Mycotal [...] Systems in greenhouses. How to use Mycotal How to use Mycotal with Low Volume Mist System What are the optimal conditions to apply Mycotal? • Mycotal [...] Mycotal range from 15°C to 28°C. However, Mycotal already starts being active from 5°C onwards. • For optimum results, it is recommended to do 3 applications

Spidex Vital FAQ

control with Spidex Vital, compared to the regular Spidex. Does anything change to the rate of application? No, continue to introduce Spidex Vital in the numbers [...] you recommend your customers to obtain the best pest control. Does anything change to the mode of application? No, continue to introduce Spidex Vital the [...] as the current product. How will this change my existing program that has been working for years? Apart from the fact you have to switch your current pl

Plant Pollinator interactions in high temperatures

30° C, the pollination degrades, and above 32° C, there are severe implications for yield and quality. It is essential to point out that exposure to maximum [...] 35° C impedes pollination. The maximum temperature in the greenhouse must be kept below 30° C to maintain a lower flower temperature. Even at 28° C, pollination [...] the hive by 2 to 15° C, which can cause damage to the hive. In conventional greenhouses, the recommended humidity range is 60-75%. Due to better air movement

Manual Wireless Beehome

address (see above for instructions on how to set the address/frequency) will have to be installed in the aisle. In order to prevent signal interference, the [...] transmitter’s menu The transmitter's menu is only used to connect the climate computer to the transmitter or to change the digital frequency of the transmitter [...] The following information is used to explain how the transmitter's menu works: If the LED on the printed circuit-board (PCB) (appendix 1) illuminates once

How to use Aphiscout from Koppert

How to use Aphidend from Koppert

How to use Citripar from Koppert

How to use Spical Ulti-Mite from Koppert

How to use Swirski-Mite from Koppert

How to use Entonem from Koppert